RC-Monster Forums - View Single Post

Jeremy1976 · 03.31.2009, 05:15 PM

No sorry. I need to know what 19/56 is and 21/54. What that would be equivalent to in the stock Rustler 48 pitch gears. I was going to use 21/56 but there is not enough adjustment to allow correct mesh, it is too tight. That is the reasoning to drop 2 teeth on the spur to 54.

So my gearing options will be:
19/56
19/54
21/54

All 0.8 pitch.

Sorry for any confusion. I am not good at figuring out the equivalent stock ratio.

	(#7)
Jeremy1976 RC-Monster Aluminum Offline Posts: 537 Join Date: Oct 2007	03.31.2009, 05:15 PM No sorry. I need to know what 19/56 is and 21/54. What that would be equivalent to in the stock Rustler 48 pitch gears. I was going to use 21/56 but there is not enough adjustment to allow correct mesh, it is too tight. That is the reasoning to drop 2 teeth on the spur to 54. So my gearing options will be: 19/56 19/54 21/54 All 0.8 pitch. Sorry for any confusion. I am not good at figuring out the equivalent stock ratio.