View Single Post
Old
  (#36)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
04.08.2009, 09:23 PM

Quote:
Originally Posted by ClodMaxx View Post
squee - what do you have?
I have a '00 Camaro SS. When I bought it had stock shortblock, cam, LS6 intake, UD pulley, valve springs, and a STS turbo with 5lbs of boost, making right at 500hp. Unfortunately, I blew the motor in about 20 miles (I knew it was weak and wasn't gonna last long at all when I bought it and for now I'm driving my '69 C10). On the bright side though, it came with a 383 LS1 stroker with a kryoed forge crank, Scat rods, Wiesco pistons, Patriot heads, etc, (was built with the turbo in mind and would have made roughly 1000hp) and I just bought the rest of the stuff I need like cam, lifters, etc. I'm just gonna go NA for now with a HUGE cam (232/236 and .595 lift on a 110 lobe center) and then sell the turbo and most likely go with a Magnacharger in a few months time. I'm hoping for right at the same it was making with the turbo, and probably around 650 (to the wheels of course) with the supercharger.

Basic mods are:

Moser 12 bolt
adjustable lower control arms
adjustable panhard bar
Centerforce clutch
Pro 5.0 shifter
stainless longtube headers
Borla adjustable catback
electric cutout
high flow cats
yada yada

I could go on for ever.

Last edited by squeeforever; 04.08.2009 at 09:25 PM.
  Send a message via AIM to squeeforever  
Reply With Quote