here some pic's from my new e-maxx input shaft i made to handle the revo slipperunit

first the shaft loaded with 1st and 2nd gear pinion, bearing and pin




next the slipper pressure plate
the shoulder from the pressure plate will sit next to the bearing when you push it over the pin




here it's pushed over the pin





befor i'm able to do this i must grind the i think ventilation rib down




the shaft back in place





here you can see why i grind the ventilation rib down



cause there's no space for it



here one pic of the slipper plate after it was a bit loose




sorry for the bad pic's they are taken from my cybershot