RC-Monster Forums - View Single Post

jesi · 04:33 PM

Crawling is also about fine.
But more testing....

edit:

Okay.

First i did try that XL 2800kv motor with Mamba Max (also CC-BEC), at 4S 4000mah.
I drive about 7min _very_ light bashing, then esc goes temp cutoff (newsflash?, not.)

Today i did get little box (IP66) and make rugged prototype v0.00001:

I make inlets, filled that box with PURE silicone oil, drop esc in and close the box.

I drive about 15min, very hard bashing.
The esc box was about hand warm after that, and no temp cutoff or anything else problems........

So, now i have fully waterPROOF brushless Summit.

Now i need some nice sensored motor & esc for better crawling =)
What you recommend?

	(#6)
jesi RC-Monster Stock Offline Posts: 15 Join Date: Sep 2006 Location: Tampere, Finland.	04.15.2009, 04:14 PM Crawling is also about fine. But more testing.... edit: Okay. First i did try that XL 2800kv motor with Mamba Max (also CC-BEC), at 4S 4000mah. I drive about 7min _very_ light bashing, then esc goes temp cutoff (newsflash?, not.) Today i did get little box (IP66) and make rugged prototype v0.00001: I make inlets, filled that box with PURE silicone oil, drop esc in and close the box. I drive about 15min, very hard bashing. The esc box was about hand warm after that, and no temp cutoff or anything else problems........ So, now i have fully waterPROOF brushless Summit. Now i need some nice sensored motor & esc for better crawling =) What you recommend? /Jere [2* Traxxas Summit] Last edited by jesi; 04.15.2009 at 04:33 PM.