View Single Post
Old
  (#97)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
04.23.2009, 01:47 AM

Quote:
Originally Posted by FyrFytr998 View Post
Tell me about it. I've been running a nitro Revo 3.3 since November and have probably put more money into it than I'd care to admit. Was gonna go the full scale electric route till the mini Revo was announced.
I've sunk so much money into my electric Revo it outweighs the rest of my RC's combined. I started converting it well before the E-Revo came out (before the Revo 3.3 came out, in fact) and have gone through so many set ups and what not it's insane. I do have to say I've recouped a lot selling off the stuff from older setups.

But anyway, I did some searching for tire setups for our much anticipated little beasts, and here is what I came up with.

Stock Tires - 3.25 inches in diameter, 1.8 inches wide.
1/10 Truck Holeshots - 3.8 inches in diameter, 2.2 inches wide.
1/10 Buggy Holeshots - 3.2 inches in diameter, 1.8 inches wide (perfect blue groove track tire - what I'll be using).
1/10 Truck Gladiators - 4 inches in diameter, 2 inches wide.
1/10 Truck Bow Ties - 4 inches diameter, 2 inches wide.
1/10 Truck 30 Series Bow Ties - 3.9 inches diameter, 2.2 inches wide.
1/10 Buggy Bow Ties - 3.5 inches in diameter, 1.9 inches wide.
1/10 Buggy Dirt Hawgs - 3.5 inches diameter, 1.8 inches wide.
1/10 Truck Dirt Hawgs - 4 inches diameter, 2 inches wide.
1/10 Truck 30 Series Dirt Hawgs - 4.1 inches diameter, 2 inches wide.
1/10 Truck Badlands (30 series or standard 2.2) - 5 inches in diameter (too big).


The truck's wheel base is only 7.9 inches long, so if you used 5 inch tires you'd be left with less than 3 inches of space between the tires. I'd be willing to bet the tires can balloon enough to touch.

I think that going anything over about 3.5 inches in size is just too unreasonably large. I think 3.5 is already large as it is. So we pretty much have to stick to the buggy tires until companies come out with tires specifically sized to the truck.

I will personably be sticking with the stock talons for bashing and the 1/10 Buggy Holeshots for the track. I may pick up a set of 1/10 Buggy Dirt Hawgs if the talons prove to have poor traction, but if their anything like the full size talons, they have acceptable grip for bashing.


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
   
Reply With Quote