RC-Monster Forums - View Single Post

RC-Monster Mike · 12.18.2005, 09:12 PM

Those are clutch shims and screws and the clutch/flywheel nut(hold flywheel tight against the collet on the crank). The shims and spacer aren't necessarily needed, depending on what cltch bell you use.

	(#7)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	12.18.2005, 09:12 PM Those are clutch shims and screws and the clutch/flywheel nut(hold flywheel tight against the collet on the crank). The shims and spacer aren't necessarily needed, depending on what cltch bell you use.