RC-Monster Forums - View Single Post - Brushless motor and controller for under 700$

JOHNNYMAXXIMA · 06:39 PM

My truck has just a Feigao 9L with the warrior 9920 on 14 cells. This setup (motor & controller) will cost you under $300. It is then recomended to upgrade the idler gears in the tranny and some upgraded CVD's as well.

I clocked it with a radar gun last week at 38mph. Compare that with the stock setup that does about 25mph and I'd say that's a pretty big jump. Anything more than 14 cells will be hard to put in the stock chassis. Although I am getting ready to ad 2 more cells to each side for a total of 16. But most of your "ready made" battery packs out there are 7cells. My gearing is 66/19.

	(#3)
JOHNNYMAXXIMA RC-Monster Dual Brushless! Offline Posts: 950 Join Date: Feb 2005 Location: Corona, Ca.	12.19.2005, 06:35 PM My truck has just a Feigao 9L with the warrior 9920 on 14 cells. This setup (motor & controller) will cost you under $300. It is then recomended to upgrade the idler gears in the tranny and some upgraded CVD's as well. I clocked it with a radar gun last week at 38mph. Compare that with the stock setup that does about 25mph and I'd say that's a pretty big jump. Anything more than 14 cells will be hard to put in the stock chassis. Although I am getting ready to ad 2 more cells to each side for a total of 16. But most of your "ready made" battery packs out there are 7cells. My gearing is 66/19. Last edited by JOHNNYMAXXIMA; 12.19.2005 at 06:39 PM.