RC-Monster Forums - View Single Post

brushlessboy16 · **Esc Settings Vs. Runtime -** 05.11.2009, 10:08 AM

Currently I run y Truggy in the nitro Class at my local track. 5 minute heats and 15 minute mains.

Setup:

Cen Matrix TR FRE

Gearing 14/52

4s

CC 2200kv Combo
- 0 Timing for heat, No punch control, 11.8v cutoff.

Temps after a heat would be
Motor-115
Esc-105
Batteries- 90

I Run 4100mah packs for heats and 5200mah packs for Mains. The 5200's can last about 13min going full bore.

What settings would i tweak to get a bit more midrange grunt or to get a bit more runtime.
Thanks :)

	(#1)
brushlessboy16 Im not dark, Im over ripened! xD Offline Posts: 5,607 Join Date: Sep 2007 Location: Westampton NJ	Esc Settings Vs. Runtime - 05.11.2009, 10:08 AM Currently I run y Truggy in the nitro Class at my local track. 5 minute heats and 15 minute mains. Setup: Cen Matrix TR FRE Gearing 14/52 4s CC 2200kv Combo - 0 Timing for heat, No punch control, 11.8v cutoff. Temps after a heat would be Motor-115 Esc-105 Batteries- 90 I Run 4100mah packs for heats and 5200mah packs for Mains. The 5200's can last about 13min going full bore. What settings would i tweak to get a bit more midrange grunt or to get a bit more runtime. Thanks :) Benjamin White R/c Monster Team Driver Jq the car, LST, Sportweks turmoil pro Unconventional Techniques, Superior Results