RC-Monster Forums - View Single Post - EVERYTHING MUST GO! BL Crt.5 BL Rustler, Lipos, Onyx 230, Servos ALL my extra parts!!

R00ST · 07:45 PM

I have been into rc for over 10 years now. I sold all of my stuff a couple years back (brushless revo's and the like) and just kept my accessories and random tid bits. Just a year ago I got back into the hobby and started building a brushless fastlane rustler as well as a brushless crt.5 with RC Monster chassis. I also have a roller pede. Its all for sale now! No time to use them :(

The way I am going to do this is to sell the Trucks off first. I am going to do it in an "A La Carte" type format. Right now both the Fastlane Rustler and the CRT.5 are rollers. I have a VXL motor (three packs on it), a Mamba Max controller (20 or so packs through it). This setup can go in either truck, or be sold separately.

Rustler VXL has almost new fastlane and RPM parts on it (3 runs on them):
Fastlane extended bulk
Fastlane extended A-arms and Tie rod kit
New sealed bearings throughout
RPM Carrier on all corners
Blue Aluminum Wheelie bar
Used Road hawg rears
New (unglued) Road Rage fronts (on buggy wheels)
Aluminum shocks on all corners
RPM Bumper
Freshly rebuilt tranny with brand new Aluminum Idler gear
Brand new Atomic Blue Flame body (does not even have body holes drilled yet)

CRT.5 Has RC Monster Extended Billet annodized Chassis with motor and Controller/receiver/Servo Mounts
Has Brand new Piggy Back shocks on it (never run with them on)
Custom Painted body (Has a few small cracks, good as a beater body)
Gorillamax Velcro straps with Traxxas top hold down. Also includes the smaller RC Monster billet battery hold down.
Also includes all Stock CRT.5 nitro parts! (Clutch/Diff parts, CF Radio tray etc etc).

Pede Roller:
Fully Rolling with full tranny. Great for spare parts. I got this in a trade a couple years back and its just sat on my work bench! Comes with 2018 servo. Also comes with good condition Rustler VXL Body

So you choose the radio gear, tires, if you want the brushless i have or not, the shocks, etc etc for the vehicle of choice.

Only radio's I have are traxxas (TQ3. does not have battery cover) and TQ2 with one two channel receiver).
Servo's:
Micro traxxas 2060
Great condition 2055
2055 with tabs broken off (good to rig up, or good for replacement internals)
Great condition JR Z590 servo (good speed and torque, works great in rustler or crt.5)
Airtronics 94755 Digital servo

I have Brand New Onyx 230 charger (never even plugged in, box was opened to look at it and take pictures). Also a new Astro "Blinky" balancer (opened the package and plugged it in to balance one lipo pack, then put it back in the package).

I have two 3s 5000mah Lipo's. One has been charged/discharged twice, the other is brand new never used.
I also have two 8 cell 1500 NICD packs (good for messing around).
Also one Tenergy 3500 6 cell and one Tenergy 7 cell 4200 (I think its 4200). The Tenergy's have been cycled approximately 20 times.

- I have a Body clip lot (about 75 body clips)
- A Shock lot (couple pairs of shocks and shock parts)
- A lot of wheel hexes (about 40 of them)
- Lot of Servo parts (Metal servo lock downs and tons of savers/horns)
- Lot of bearings (about 20 random bearings some new, some used, in good shape)
- Three pairs of shocks, CRT truggy, Traxxas Big Bore (Stampede/rustler rear) and CRT.5 Aluminum fronts. If somebody wants the aluminum crt.5 back on the truck the Piggy Back shocks on the crt.5 can be sold (They are brand new, just put on the truck).
- A lot of pinions - this is really handy! Mostly 48 pitch, a couple of 32. Ranging from 11 tooth up to 30!!! Great for the people out there (like me) that love to mess with gearing.
- A lot of Random parts (mostly Maxx parts, random turnbuckles and tie rods etc)
- A lot of Body Paint (most all are half or more full)
- A lot of Oil's and fluids, Diff oil, Shock oil, Grease and some nitro Castor Oil.
- Integy Type II Blue Bell crank with bearings for rustler/pede/bandit (New, never used)
- Integy 17mm Hub adaptors (run once) Fit all 1/10
- A lot of Nitro parts (about 10 new glow plugs, a glow ignitor, an airfilter and some fuel tubing)
- A lot of Wiring and plugs - Deans/ Tamiya connectors with some random plugs/ bits of wiring. Also included is the New package of deans and the New Deans Pig Tail in the electronics picture
- A Power Supply. FastMHZ Made this for me a couple years back but I never did use it. I had him make it so I could run my two Duratrax Digital Peak chargers on one power supply (the PS I had for them stopped working).
- A Duratrax "Real Race" Controller. I lost the software disc.. Maybe someone lost their controller? Its free (cost of shipping) or its going in the trash!
- Random Switches, some motor heat sinks (fit 550 or 540 cans)
- Lots of Rustler/Bandit/ Pede parts (arms, shock towers, hubs, RPM End links etc etc)
- Moabs on Losi wheels, 1/8 Moab's on Green XTM wheels, Two X pin's on ofna wheels (new), a single holeshot tire on a traxxas wheel (FREE), Two brand new 30 series wheels with bowtie tires premounted (fronts), taken out of package for pics, Some nice Ofna Blazer SST tires (perfect size for crt.5 or rustler, slightly larger than standard 1/8 buggy tires).
- Also a single Red RX crystal (FREE) and a new in package Tiny GWS motor (not even sure what its for...lol)

Everything in the pics MUST GO so let me know what you want! Eventually whatever is left will go to ebay but wanted to try and help out the forum members first with some stuff! The "lots" of things are VERY handy to have!

PICS ----- http://smg.photobucket.com/albums/v329/r00st/?newest=1 ---- PICS

Make sure to click "VIEW ALL" At the bottom of the page (there are about 70 pictures). Disregard the random pictures of the Raptor :)

I am taking offers on everything! Just PM me and ill get back to you as soon as I can :)

-Mike

	(#1)
R00ST RC-Monster Carbon Fiber Offline Posts: 284 Join Date: Jun 2005	EVERYTHING MUST GO! BL Crt.5 BL Rustler, Lipos, Onyx 230, Servos ALL my extra parts!! - 05.13.2009, 05:41 PM I have been into rc for over 10 years now. I sold all of my stuff a couple years back (brushless revo's and the like) and just kept my accessories and random tid bits. Just a year ago I got back into the hobby and started building a brushless fastlane rustler as well as a brushless crt.5 with RC Monster chassis. I also have a roller pede. Its all for sale now! No time to use them :( The way I am going to do this is to sell the Trucks off first. I am going to do it in an "A La Carte" type format. Right now both the Fastlane Rustler and the CRT.5 are rollers. I have a VXL motor (three packs on it), a Mamba Max controller (20 or so packs through it). This setup can go in either truck, or be sold separately. Rustler VXL has almost new fastlane and RPM parts on it (3 runs on them): Fastlane extended bulk Fastlane extended A-arms and Tie rod kit New sealed bearings throughout RPM Carrier on all corners Blue Aluminum Wheelie bar Used Road hawg rears New (unglued) Road Rage fronts (on buggy wheels) Aluminum shocks on all corners RPM Bumper Freshly rebuilt tranny with brand new Aluminum Idler gear Brand new Atomic Blue Flame body (does not even have body holes drilled yet) CRT.5 Has RC Monster Extended Billet annodized Chassis with motor and Controller/receiver/Servo Mounts Has Brand new Piggy Back shocks on it (never run with them on) Custom Painted body (Has a few small cracks, good as a beater body) Gorillamax Velcro straps with Traxxas top hold down. Also includes the smaller RC Monster billet battery hold down. Also includes all Stock CRT.5 nitro parts! (Clutch/Diff parts, CF Radio tray etc etc). Pede Roller: Fully Rolling with full tranny. Great for spare parts. I got this in a trade a couple years back and its just sat on my work bench! Comes with 2018 servo. Also comes with good condition Rustler VXL Body So you choose the radio gear, tires, if you want the brushless i have or not, the shocks, etc etc for the vehicle of choice. Only radio's I have are traxxas (TQ3. does not have battery cover) and TQ2 with one two channel receiver). Servo's: Micro traxxas 2060 Great condition 2055 2055 with tabs broken off (good to rig up, or good for replacement internals) Great condition JR Z590 servo (good speed and torque, works great in rustler or crt.5) Airtronics 94755 Digital servo I have Brand New Onyx 230 charger (never even plugged in, box was opened to look at it and take pictures). Also a new Astro "Blinky" balancer (opened the package and plugged it in to balance one lipo pack, then put it back in the package). I have two 3s 5000mah Lipo's. One has been charged/discharged twice, the other is brand new never used. I also have two 8 cell 1500 NICD packs (good for messing around). Also one Tenergy 3500 6 cell and one Tenergy 7 cell 4200 (I think its 4200). The Tenergy's have been cycled approximately 20 times. - I have a Body clip lot (about 75 body clips) - A Shock lot (couple pairs of shocks and shock parts) - A lot of wheel hexes (about 40 of them) - Lot of Servo parts (Metal servo lock downs and tons of savers/horns) - Lot of bearings (about 20 random bearings some new, some used, in good shape) - Three pairs of shocks, CRT truggy, Traxxas Big Bore (Stampede/rustler rear) and CRT.5 Aluminum fronts. If somebody wants the aluminum crt.5 back on the truck the Piggy Back shocks on the crt.5 can be sold (They are brand new, just put on the truck). - A lot of pinions - this is really handy! Mostly 48 pitch, a couple of 32. Ranging from 11 tooth up to 30!!! Great for the people out there (like me) that love to mess with gearing. - A lot of Random parts (mostly Maxx parts, random turnbuckles and tie rods etc) - A lot of Body Paint (most all are half or more full) - A lot of Oil's and fluids, Diff oil, Shock oil, Grease and some nitro Castor Oil. - Integy Type II Blue Bell crank with bearings for rustler/pede/bandit (New, never used) - Integy 17mm Hub adaptors (run once) Fit all 1/10 - A lot of Nitro parts (about 10 new glow plugs, a glow ignitor, an airfilter and some fuel tubing) - A lot of Wiring and plugs - Deans/ Tamiya connectors with some random plugs/ bits of wiring. Also included is the New package of deans and the New Deans Pig Tail in the electronics picture - A Power Supply. FastMHZ Made this for me a couple years back but I never did use it. I had him make it so I could run my two Duratrax Digital Peak chargers on one power supply (the PS I had for them stopped working). - A Duratrax "Real Race" Controller. I lost the software disc.. Maybe someone lost their controller? Its free (cost of shipping) or its going in the trash! - Random Switches, some motor heat sinks (fit 550 or 540 cans) - Lots of Rustler/Bandit/ Pede parts (arms, shock towers, hubs, RPM End links etc etc) - Moabs on Losi wheels, 1/8 Moab's on Green XTM wheels, Two X pin's on ofna wheels (new), a single holeshot tire on a traxxas wheel (FREE), Two brand new 30 series wheels with bowtie tires premounted (fronts), taken out of package for pics, Some nice Ofna Blazer SST tires (perfect size for crt.5 or rustler, slightly larger than standard 1/8 buggy tires). - Also a single Red RX crystal (FREE) and a new in package Tiny GWS motor (not even sure what its for...lol) Everything in the pics MUST GO so let me know what you want! Eventually whatever is left will go to ebay but wanted to try and help out the forum members first with some stuff! The "lots" of things are VERY handy to have! PICS ----- http://smg.photobucket.com/albums/v329/r00st/?newest=1 ---- PICS Make sure to click "VIEW ALL" At the bottom of the page (there are about 70 pictures). Disregard the random pictures of the Raptor :) I am taking offers on everything! Just PM me and ill get back to you as soon as I can :) -Mike Last edited by Arct1k; 05.13.2009 at 07:45 PM.