RC-Monster Forums - View Single Post

FG101C · 09:03 PM

Yes I will take a pic. What they are saying is stock, ring gear is to the left, switch it so it's to the right. I need a low speed power drill, diff's are my least favorite thing to do and I was just in there.

Pics, Left pic stock, right pic diff reversed.

Except there's a bump on the inside of the diff housing that prevents this, it can be shaved off though. Used a little router type bit on my dremel to do this.

	(#147)
FG101C RC-Monster Aluminum Offline Posts: 765 Join Date: Aug 2007	05.16.2009, 12:11 AM Yes I will take a pic. What they are saying is stock, ring gear is to the left, switch it so it's to the right. I need a low speed power drill, diff's are my least favorite thing to do and I was just in there. Pics, Left pic stock, right pic diff reversed. Except there's a bump on the inside of the diff housing that prevents this, it can be shaved off though. Used a little router type bit on my dremel to do this. Last edited by FG101C; 06.26.2009 at 09:03 PM.