RC-Monster Forums - View Single Post

crazyjr · 12:28 AM

It went well. you really need to follow the directions to the letter. One thing though. Put the drive cups on first before you start to assemble and it helps if you have past experience with a revo, but if you follow the directions to the letter you will be ok. One problem though, the G3 battery straps are too wide for the slits in the chassis if you have a grinding bit small enough you could make it wide enough. Not a major problem, but you need to know.

	(#33)
crazyjr RC-Monster Dual Brushless Offline Posts: 3,794 Join Date: May 2005 Location: georgia	12.24.2005, 12:27 AM It went well. you really need to follow the directions to the letter. One thing though. Put the drive cups on first before you start to assemble and it helps if you have past experience with a revo, but if you follow the directions to the letter you will be ok. One problem though, the G3 battery straps are too wide for the slits in the chassis if you have a grinding bit small enough you could make it wide enough. Not a major problem, but you need to know. Work because i gotta, play because i wanna People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise Last edited by crazyjr; 12.24.2005 at 12:28 AM.