RC-Monster Forums - View Single Post - My e-revo brushless edition build

shaunjohnson · 05.26.2009, 02:47 AM

DEANS FTW!!!!!

never failed me yet.

i chose to use summit axles over the CVD's cause CVD's have a doggie bone at one end...and this always pops out on me

where as the summit shafts are technicaly a CVD at both ends.

we'll see how strong they are

trying to scrounge myself a hyper 7 diff too :P..casue the traxxas one with 500k oil is not thick enuff methinks (but i never re-build it

)
shaun

	(#51)
shaunjohnson i pwn nitro Offline Posts: 769 Join Date: Nov 2008 Location: with ur GF	05.26.2009, 02:47 AM DEANS FTW!!!!! never failed me yet. i chose to use summit axles over the CVD's cause CVD's have a doggie bone at one end...and this always pops out on me where as the summit shafts are technicaly a CVD at both ends. we'll see how strong they are trying to scrounge myself a hyper 7 diff too :P..casue the traxxas one with 500k oil is not thick enuff methinks (but i never re-build it ) shaun E-revo 3.3 conversion, 249kv outrunner, 6s, MMM the porthole from the noob world an here has been opened!! that's how i got in.