RC-Monster Forums - View Single Post

prhess · 05.28.2009, 02:30 PM

Hello,

I swapped out all the bearings in my 2650 and 2200 for ceramics from Boca. The rear cover does come off, but when I did the epoxy pulled off some electrical tape that is wrapped around the wires coming out of the motor. I easily added some new insluation (shoe goo) and off I went.

Motor is very smooth, and very cool.

I used these from boca.
http://www.bocabearings.com/main1.as...MR625C-YUU_NB2

I will post pics tonight

	(#8)
prhess RC Addict Offline Posts: 19 Join Date: Apr 2009 Location: Calgary, Alberta, Canada	05.28.2009, 02:30 PM Hello, I swapped out all the bearings in my 2650 and 2200 for ceramics from Boca. The rear cover does come off, but when I did the epoxy pulled off some electrical tape that is wrapped around the wires coming out of the motor. I easily added some new insluation (shoe goo) and off I went. Motor is very smooth, and very cool. I used these from boca. http://www.bocabearings.com/main1.as...MR625C-YUU_NB2 I will post pics tonight If you can't be good, be bad!