RC-Monster Forums - View Single Post

SpeedAssault · 07:50 PM

Hey guys/girls

I have a custom ride here and want to know if there will be wheel spinning upon take off and still not over heat things? Or will I have to gear so high inorder to keep RPM down that it will not peel out ?

10lb 1/5 custom losi direct drive, CD locked and rear locked, using a MMM, CC2200 and looking at buying a PQ 6s 6000 25c lipo 120 amps
I'm guessing a final ratio of 8:1 or so ? would be plenty for torque and speeds in 45+ 50mph
wheel base is 21"

Any recommendations here ?

Thank you very much

	(#1)
SpeedAssault Building my dream Brushless 4wd 1/5 scale Offline Posts: 311 Join Date: Nov 2008 Location: CA Bay area	RPM for 2200 with 6s - 06.01.2009, 07:48 PM Hey guys/girls I have a custom ride here and want to know if there will be wheel spinning upon take off and still not over heat things? Or will I have to gear so high inorder to keep RPM down that it will not peel out ? 10lb 1/5 custom losi direct drive, CD locked and rear locked, using a MMM, CC2200 and looking at buying a PQ 6s 6000 25c lipo 120 amps I'm guessing a final ratio of 8:1 or so ? would be plenty for torque and speeds in 45+ 50mph wheel base is 21" Any recommendations here ? Thank you very much Attached Thumbnails Rev=Osi 1/5 4wd 3.5HP 2880watts 6s Scale Super Rock Crawler buggy with MP3 Stereo STREET LUGE video Last edited by SpeedAssault; 06.01.2009 at 07:50 PM.