RC-Monster Forums - View Single Post - Dual 2S Charging Adapter (BreadBoard Version)

BrianG · 06.02.2009, 07:30 PM

Some solder wick would clean it up if you plan on doing more to that board.

Also, be sure to clearly mark the connectors, because if you also use the main Y harness and you accidentally swap the balance connectors the wrong way, you will burn up something.

	(#5)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	06.02.2009, 07:30 PM Some solder wick would clean it up if you plan on doing more to that board. Also, be sure to clearly mark the connectors, because if you also use the main Y harness and you accidentally swap the balance connectors the wrong way, you will burn up something.