RC-Monster Forums - View Single Post - My e-revo brushless edition build

mistercrash · **Splitting lipos -** 06.06.2009, 06:00 PM

I took 2 of my 3S Zippy lipos and split them today. The cells on them took a hit at one time and they are a little rippled at the ends. Other than those ripples, the packs are good and don't cause any problems so I decided to split them and make 3 2S1P packs. I took some picks of how I did it. I hope it can help someone else do the same if they need to. If you are careful, prepared and think about safety, it can be done fairly easily and safely. Lots of pics here so this will extend to the next two or three posts.

	(#79)
mistercrash Guelph, Canada, eh! Offline Posts: 1,083 Join Date: Sep 2007 Location: Guelph, Ontario, Canada	Splitting lipos - 06.06.2009, 06:00 PM I took 2 of my 3S Zippy lipos and split them today. The cells on them took a hit at one time and they are a little rippled at the ends. Other than those ripples, the packs are good and don't cause any problems so I decided to split them and make 3 2S1P packs. I took some picks of how I did it. I hope it can help someone else do the same if they need to. If you are careful, prepared and think about safety, it can be done fairly easily and safely. Lots of pics here so this will extend to the next two or three posts. No brain, no headaches.