RC-Monster Forums - View Single Post

sokmeister · 06.08.2009, 03:09 PM

I believe this is the V3...the batt wires are soldered in placed? V3? I couldn't tell if it burnt. Like mentioned...no see magic smoke and no burnt smell. The LSt wasn't more than 10 feet from me when this occurred. I felt both motor and esc...both not much more than ambient...roughly about 75 last night around 8pm in beaverton, oregon.

The fan did kick on during boot up, but would only come on at 150 or above after post.

Just very strange!

Thanks for the feedback guys. Oh, although i'm new here...been RC'ing for awhile, and have many CC plane ESCs, and a Mamba Max.

	(#4)
sokmeister RC-Monster Stock Offline Posts: 11 Join Date: Apr 2009	06.08.2009, 03:09 PM I believe this is the V3...the batt wires are soldered in placed? V3? I couldn't tell if it burnt. Like mentioned...no see magic smoke and no burnt smell. The LSt wasn't more than 10 feet from me when this occurred. I felt both motor and esc...both not much more than ambient...roughly about 75 last night around 8pm in beaverton, oregon. The fan did kick on during boot up, but would only come on at 150 or above after post. Just very strange! Thanks for the feedback guys. Oh, although i'm new here...been RC'ing for awhile, and have many CC plane ESCs, and a Mamba Max.