Quote:
Originally Posted by BL_RV0
Sounds like a cool and extremely complicated project with 4 motors, 4 escs and 4 battey packs.
|
I am slowly making it less complicated as I get a better idea of what i can do with the equipment. Setting up the radio to control everything may be difficult, but I am confident that I can achieve the desired outcome.
I think that 2 or 3 4s 5000mah packs wired in parallel will do fine. Then feed off that to the 4 escs. Having a total of 1600watts available for the drive wheels should be plenty, probably could get away with sidewinder escs, but I have some spare MM escs. The blade escs will be controlled by the switches on the radio, hopefully. I need to read the manual thoroughly and make sure that the dx6 can do what is need it to. I will only be using 3 channels, 2 for the drive wheels and the other for the blades.