[jzemaxx]

Spoke to Steve at NEU yesterday. He told me the motors run their best efficiency at 25K-35K rpm. Running a 2200KV motor at 6S would be a little much as far as rpm is concerned. I think the 3S setup with the gearing I'm running has been great no complaints other then some added run time that I was looking for. Looks though as ll the other setups and suggestions will not really get me much more if any. Running twin 4's would be to heavy in parallel, and running a single 4S even a 6000mah would only get me 88.8a/h. With twin 3S I have 111a/h and the C rating doubles to 40C. Now a single 6S with 5000mah would also get me 111a/h, with possible less amps, but the higher motor rpm with a 2200KV motor maybe negate any gains and I would need a high C rating to keep the batt temp down. I think maybe something in the 1350KV range with 6S would work well though. I plan to explore more options and pretty much just start buying motors and trying them instead of theory. Need some concrete proof myself.