RC-Monster Forums - View Single Post

Metallover · 03:56 PM

I'm thinking I could use what I have - My medusa 36-60-2000. yeah baby.

Gearing. I found if the spur/pinion are the same size, I should get around 88mph. I think 32p 44t pinion/spur should work; problem is finding the gears.

How can I make an adapter to run a spur for my pinion?

Differential Ratio: 2.5
Transmission Ratio: 1
Other Ratio: 1
Spur Tooth Count: 35
Pinion Tooth Count: 35
Total Voltage: 14.8
Motor KV: 2000
Tire Diameter (inches): 2.5
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0
Spur/Pinion Ratio: 1 : 1
Total Ratio: 2.5 : 1
Tire Circumference (inches): 7.85 inches (199.49 mm)
Total Motor Speed: 29600 RPM
Vehicle Speed: 88.06 mph (141.45 km/h)
Effective KV Value: 2000
KT constant: 0.68 oz-in/A

	(#50)
Metallover RC-Monster Spudgunner Offline Posts: 2,353 Join Date: Apr 2008 Location: South Dakota	06.12.2009, 03:48 PM I'm thinking I could use what I have - My medusa 36-60-2000. yeah baby. Gearing. I found if the spur/pinion are the same size, I should get around 88mph. I think 32p 44t pinion/spur should work; problem is finding the gears. How can I make an adapter to run a spur for my pinion? Differential Ratio: 2.5 Transmission Ratio: 1 Other Ratio: 1 Spur Tooth Count: 35 Pinion Tooth Count: 35 Total Voltage: 14.8 Motor KV: 2000 Tire Diameter (inches): 2.5 Tire Ballooning (inches): 0 Motor Current Draw: 0 Motor coil Ω: 0 Spur/Pinion Ratio: 1 : 1 Total Ratio: 2.5 : 1 Tire Circumference (inches): 7.85 inches (199.49 mm) Total Motor Speed: 29600 RPM Vehicle Speed: 88.06 mph (141.45 km/h) Effective KV Value: 2000 KT constant: 0.68 oz-in/A Last edited by Metallover; 06.12.2009 at 03:56 PM.