RC-Monster Forums - View Single Post - 8ight-t 1.0 Race Roller Conversion Help

BL_RV0 · 06.13.2009, 12:39 AM

2200kv is good for lower volt operation, while lower kv is good for HV. Shoot for about 35000rpm. You get rpm like this: rpm=kv*battery voltage (not amt. of cells) each cell is 3.7v, so for a 4s pack the voltage would be 14.8v and for a 5s it would be 18.5v. Got it?

	(#2)
BL_RV0 RC-Monster Dual Brushless Offline Posts: 5,061 Join Date: Oct 2007 Location: Thousand Oaks CA	06.13.2009, 12:39 AM 2200kv is good for lower volt operation, while lower kv is good for HV. Shoot for about 35000rpm. You get rpm like this: rpm=kv*battery voltage (not amt. of cells) each cell is 3.7v, so for a 4s pack the voltage would be 14.8v and for a 5s it would be 18.5v. Got it? Get me back into RC!