RC-Monster Forums - View Single Post

RC-Monster Mike · 06.13.2009, 04:59 PM

That is not the CRT motor mount. It looks like it could be the CR mount, which allows down to about a 12t pinion. The CRT mount had a lower gearing opportunity built into it because it was known that the buggy ratio diffs would potentially require very small pinions.

	(#17)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	06.13.2009, 04:59 PM That is not the CRT motor mount. It looks like it could be the CR mount, which allows down to about a 12t pinion. The CRT mount had a lower gearing opportunity built into it because it was known that the buggy ratio diffs would potentially require very small pinions.