RC-Monster Forums - View Single Post

RC-Monster Mike · 06.13.2009, 05:25 PM

The CR mount will work - with the appropriate voltage, motor, and gearing selection. I say run it like you stole it, while saving up for an 80mm Medusa motor(heatsink will work nicely with the 80mm Medusa motor). Put a fan on the Feigao(thread m2.5 screws between the fins on the heatsink) in the meantime to keep temps in check. :)

	(#19)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	06.13.2009, 05:25 PM The CR mount will work - with the appropriate voltage, motor, and gearing selection. I say run it like you stole it, while saving up for an 80mm Medusa motor(heatsink will work nicely with the 80mm Medusa motor). Put a fan on the Feigao(thread m2.5 screws between the fins on the heatsink) in the meantime to keep temps in check. :)