RC-Monster Forums - View Single Post - Losi 2.2 CC and Losi "Nino" MRC (56k warning)

kulangflow · **Losi 2.2 CC and Losi "Nino" MRC (56k warning) -** 06.19.2009, 01:16 PM

Thought I'd share a couple of my crawlers.

MRC has a mini-Nino chassis and Eritex Heavies with blue-Claws, aluminum shocks and a Li-Saver LVC.

Losi Comp Crawler has a Mamba Max, CCBEC, Titan 550 motor (13t pinion), 3s 1700 mAh lipo, 7995 and 82MG servos.

For the LCC, I haven't had any of the problems people have apparently been having. I re-greased the gears with Gear Jelly, removed the extra two shims from the diffs (they inadvertently installed 2 too many), and limited the steering EPA to 90%. I also re-loctited all the CVD screws/pins. No issues.

I did try a 35t motor at first, but it just wasn't up to the task. It would stall out and smoke if stressed. The Titan 21T 550 is handling it like a champ now.

I'll come up with a video soon and add it to this thread.

Good times.

	(#1)
kulangflow Never Fast Enough Offline Posts: 914 Join Date: Jul 2005 Location: UT	Losi 2.2 CC and Losi "Nino" MRC (56k warning) - 06.19.2009, 01:16 PM Thought I'd share a couple of my crawlers. MRC has a mini-Nino chassis and Eritex Heavies with blue-Claws, aluminum shocks and a Li-Saver LVC. Losi Comp Crawler has a Mamba Max, CCBEC, Titan 550 motor (13t pinion), 3s 1700 mAh lipo, 7995 and 82MG servos. For the LCC, I haven't had any of the problems people have apparently been having. I re-greased the gears with Gear Jelly, removed the extra two shims from the diffs (they inadvertently installed 2 too many), and limited the steering EPA to 90%. I also re-loctited all the CVD screws/pins. No issues. I did try a 35t motor at first, but it just wasn't up to the task. It would stall out and smoke if stressed. The Titan 21T 550 is handling it like a champ now. I'll come up with a video soon and add it to this thread. Good times. He's down by the river ... walking on water.