hmm - some more info on Mr C's conversions.... also some info on page 5 of this thread for more detailed info on the LST conversion :) http://forums.radiocontrolzone.com/s...=196185&page=5

I cant say for sure what u get - best to email Rob - constructor@ace-cars.de - but, without all the electrics... you would most likely get....

*Custom Motor Mount - (info - http://forums.radiocontrolzone.com/s...&postcount=102 - the mount is able to be moved length ways too to accomodate longer/shorter cans etc)

*Carbon Fibre Chassis Plates
Main Chassis Deck
Front/Centre and Rear Lower Chassis Skid Plates (same as stock alum skids)
Upper decks, where the Shock towers are mounted.
And the 2 side decks that hold the brake servo and the opposite side where the gear cover is.
(Another thing to note - is that under the NewEraModels Skid plates on the underneath shot of the truck - they are covering up the 3 lower CF chassis skid plates.)

I'd say it'd come with the battery poles too.

*Clutchbell assembly for motor - uses STOCK LST pinions - i have had 2 other sets of pinions made up with 4+ and 6+ extra teeth. (not sure if this will be included - was charged seperate from "Complete Conversion Kit" at 25 Euros...

But i had him grab all the electrics/batts etc etc etc too - so price was a bit different - i think the kit itself came to around 180 euro or so, and the clutchbell ass. was around 25 euros....