|
06.21.2009, 08:32 PM
Does this get worse after say 100'? Have you tried....
1. twisting the motor wires and servo wires.
2. disconnect additional fan and see if that is the cause
3. check antenna wire for ANY nicks
4. check placement of esc in regards to the rx
1. MBX-6 T8 1900KV, RX8 ON 4S
2. MBX-5T 1520, MMM ON 5S
3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S
4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S
5. TEN T 2650 T8, MMP ON 3S
|