RC-Monster Forums - View Single Post

BrianG · 06.23.2009, 01:31 AM

What you describe sounds EXACTLY like what was happening to me with my Quark for a little while. Turned out the UBEC I was using (a cheapie $5 Chinese one) was the culprit; it was cutting out causing the ESC to "reboot" because of receiver signal loss. Replaced with a DimensionEngineering BEC and has been fine ever since. And this was all with 4s lipo.

	(#11)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	06.23.2009, 01:31 AM What you describe sounds EXACTLY like what was happening to me with my Quark for a little while. Turned out the UBEC I was using (a cheapie $5 Chinese one) was the culprit; it was cutting out causing the ESC to "reboot" because of receiver signal loss. Replaced with a DimensionEngineering BEC and has been fine ever since. And this was all with 4s lipo.