Quote:
Originally Posted by pinkpanda3310
The default setting is number 2 which is auto-lipo. It will automatically detect how many cells and cut-off at 3v per cell.
That's on a v3, I don't know if the earlier versions are the same.
|
Auto is so you can go between 2s and 3s.
Quote:
Originally Posted by lincpimp
ON 6s set the lvc to 19.2v. You should be able to do this with the included pc interface cable and castle link.
|
Thanks Link, just thought 19.2 was to low since it's a 22.v batt.
Trying to get it setup on radio
The ESC lost the first config for my radio which took forever because I needed a tech to guide me through manual prgramming as he listed from the phone the beeps and told me what to do, but now the tech says it cant be done, my radio has a Brake button and also a Reverse, the CC techs say there is no Brake function that it's a back button, but there is as the tech got me working with my brake So I know it works. Just a matter of doing the same process.