[streethot]

Originally Posted by BrianG

If you can supply the mAh of the 6s setup alogn with the runtime you got, you can then estimate the runtime at various other voltages. This page might help with that: http://scriptasylum.com/rc_speed/_power.html

I have used this setup on 6S

MGM Esc and MMM
Lipo 6s x 5000mah 25/50C
Neu 1527 1D (2300kv)

TOOOOOOOO strong....fast as hell when I assembled as a Inferno GT with ferrari body......BUT......the motor+battery setup is not correct.....too much motor for the batt and esc......and on a buggy for offroad....its impossible to handle.....too fast, too agressive, halt every time because of temps......

this setup is new to me......i never used 4s, only 6s........