Quote:
Originally Posted by Mentat
Im using 48t/16t gearing and I ran 2 lipos packs thru (the engine has less then 1 hour total run time). First was a 4s1p 5000mah pack ran it out and the engine wasnt really all that hot.
|
If you did not have heat problems with that gearing and 4s lipo you should have the same results if you continue to run 4s lipo. No need to re-gear if your current gearing works fine. If you plan to run 5s again (and you say that you do not) You will need to put a smaller pinion on to adjust for the higher motor speed. I ran a lst on 5s with the 2200 motor and geared for 40 mph it did great. I am sure your motor is fine.