Quote:
Originally posted by RC-Monster Mike
Oh, you can get the speed, but you get heat with it, as it is working the little motors quite hard.
|
Efficiency is the key, when it goes down heat goes up.
For a example with 80% (very good numbers, unrealistic ones but...) motor efficiency with 600W load you need to dissipate 600*.2=120W with 60% - 600*.4=240W. Now based on can size you can easy find out which one has more thermo-mass and bigger cooling area.
But with the rest, you correct, it is always possible to push it harder, especially for short periods.
Artur
P.S. Thank you for new ESC.