RC-Monster Forums - View Single Post

Finnster · 06.29.2009, 09:10 PM

I would 2nd just going for a MMM. By the time you buy a fan and bec and all that other stuff you end up at about the same price but a less capable unit.

A combo would be great if you can find it, tho I prefer to use higher voltage to keep the temps down. I can get my 1700kv 2.5D on 5S upto 160 after enough hard running, and a 4S/2200kv unit will heat up even faster.

Lastly, I would stick to RCM pinions. I run 16/48.

The HST is a great truck either way, turns awesome and is very affordable.

	(#1)
Finnster KillaHurtz Offline Posts: 2,958 Join Date: Apr 2006 Location: Bucks Co, PA	06.29.2009, 09:10 PM I would 2nd just going for a MMM. By the time you buy a fan and bec and all that other stuff you end up at about the same price but a less capable unit. A combo would be great if you can find it, tho I prefer to use higher voltage to keep the temps down. I can get my 1700kv 2.5D on 5S upto 160 after enough hard running, and a 4S/2200kv unit will heat up even faster. Lastly, I would stick to RCM pinions. I run 16/48. The HST is a great truck either way, turns awesome and is very affordable.