RC-Monster Forums - View Single Post

scarletboa · 12:02 AM

it was geared for about 40-45mph (hadn't even gotten it to 2mph with that motor or esc)

the only setting changed was i turned the LVC off since i was using 3s lipo at first and i was keep a close eye on the pack voltages (i have one of those hobbycity meters)

the truck is around 13-14lb with the batteries.

edit: the hole where the smoke came out is in between the switch and fan/bec plugs.

	(#3)
scarletboa RC-Monster Aluminum Offline Posts: 929 Join Date: Mar 2009 Location: Las Vegas NV	06.30.2009, 11:59 PM it was geared for about 40-45mph (hadn't even gotten it to 2mph with that motor or esc) the only setting changed was i turned the LVC off since i was using 3s lipo at first and i was keep a close eye on the pack voltages (i have one of those hobbycity meters) the truck is around 13-14lb with the batteries. edit: the hole where the smoke came out is in between the switch and fan/bec plugs. They say a good mechanic only needs 2 tools - WD40 & Duct tape. If it moves, and its not supposed to, duct tape. If it doesn't move, and its supposed to, WD40. Last edited by scarletboa; 07.01.2009 at 12:02 AM.