RC-Monster Forums - View Single Post - My e-revo brushless edition build

mistercrash · 10:59 PM

I couldn't wait 12 hours for the picture glue to cure so as soon as it felt cured enough, I put a thin coat of white and backed it with silver. The pics show the body whiter than it really is. I'm satisfied with the effect of the white and silver, it is very light gray like the real Herbie and has a definite pearl sheen to it. I like it. The body doesn't come with a wing, in the scrap Lexan left after trimming, I saw a piece that could become a wind for it so I made it but left it clear.

	(#8)
mistercrash Guelph, Canada, eh! Offline Posts: 1,083 Join Date: Sep 2007 Location: Guelph, Ontario, Canada	07.04.2009, 10:57 PM I couldn't wait 12 hours for the picture glue to cure so as soon as it felt cured enough, I put a thin coat of white and backed it with silver. The pics show the body whiter than it really is. I'm satisfied with the effect of the white and silver, it is very light gray like the real Herbie and has a definite pearl sheen to it. I like it. The body doesn't come with a wing, in the scrap Lexan left after trimming, I saw a piece that could become a wind for it so I made it but left it clear. No brain, no headaches. Last edited by mistercrash; 07.04.2009 at 10:59 PM.