RC-Monster Forums - View Single Post

BL_RV0 · **MMM V3 RX wires dislodged themselves -** 07.15.2009, 10:15 PM

Hey guys. I was going out to run my truck, just driving the truck down my hallway to go outside to drive for a bit. All of the sudden, full throttle. I ran as fast as I could to disconnect the battery. The MMM case just fell open, no torque applied to it to get it to come apart. The RX wires have been yanked out of their little tabs on the board. I'm not going to try to repair this myself, although I was thinking about it. I popped the case back together so no pics. I have no idea what could have happened, maybe one came loose and the others dislodged in the collision against my hall wall?! Will castle cover this for me? I did not intentionally open the case ever, and only modification I did was remove the switch. The MMM does not smell burnt at all. Thanks...

	(#1)
BL_RV0 RC-Monster Dual Brushless Offline Posts: 5,061 Join Date: Oct 2007 Location: Thousand Oaks CA	MMM V3 RX wires dislodged themselves - 07.15.2009, 10:15 PM Hey guys. I was going out to run my truck, just driving the truck down my hallway to go outside to drive for a bit. All of the sudden, full throttle. I ran as fast as I could to disconnect the battery. The MMM case just fell open, no torque applied to it to get it to come apart. The RX wires have been yanked out of their little tabs on the board. I'm not going to try to repair this myself, although I was thinking about it. I popped the case back together so no pics. I have no idea what could have happened, maybe one came loose and the others dislodged in the collision against my hall wall?! Will castle cover this for me? I did not intentionally open the case ever, and only modification I did was remove the switch. The MMM does not smell burnt at all. Thanks... Get me back into RC!