RC-Monster Forums - View Single Post

medusa'd maxx · **shimming 8t 1.0 rear diff -** 07.16.2009, 02:15 AM

Sorry about the skimming - got to stop posting at 3 am
in response to above
Its an 8T 1.0 with a tekno conversion, Medusa 36 80 2000kv on 5s geared 13 X 48

I have the Alu Inserts
I have two shims (all I could fit) on the ring gear side of the diff
no shims on the pinion
It skips only when I mash the throttle

I'm wondering if the motors flexing the diff case
Or should I try shimming the pinion

	(#6)
medusa'd maxx Brushless Basher Offline Posts: 59 Join Date: Apr 2009 Location: Adelaide South Australia	shimming 8t 1.0 rear diff - 07.16.2009, 02:15 AM Sorry about the skimming - got to stop posting at 3 am in response to above Its an 8T 1.0 with a tekno conversion, Medusa 36 80 2000kv on 5s geared 13 X 48 I have the Alu Inserts I have two shims (all I could fit) on the ring gear side of the diff no shims on the pinion It skips only when I mash the throttle I'm wondering if the motors flexing the diff case Or should I try shimming the pinion