RC-Monster Forums - View Single Post - High temp problems

zeropointbug · 07.18.2009, 03:12 AM

First of all, I am running the same motor, except finned version on 6s lipo in a Revo 3.3, and after a 30 min main the motor temp was 130F, verified by two different temp guns (cuz I didn't really believe it). The Revo is quite a bit heavier, but I also have better airflow, and a finned case...

I don't really know what else you could do?

BTW, is that tape on the motor to hold the Neu end bell cover on?

	(#5)
zeropointbug Z-Pinch racer Offline Posts: 3,141 Join Date: Nov 2006 Location: SK, Canada	07.18.2009, 03:12 AM First of all, I am running the same motor, except finned version on 6s lipo in a Revo 3.3, and after a 30 min main the motor temp was 130F, verified by two different temp guns (cuz I didn't really believe it). The Revo is quite a bit heavier, but I also have better airflow, and a finned case... I don't really know what else you could do? BTW, is that tape on the motor to hold the Neu end bell cover on? “The modern astrophysical concept that ascribes the sun’s energy to thermonuclear reactions deep in the solar interior is contradicted by nearly every observable aspect of the sun.” —Ralph E. Juergens