Quote:
Originally Posted by mistercrash
Are you using the plate that places the motor up in the center over the tranny instead of the ERBE's plate that place the motor to the side of the tranny? I have seen a few conversions that have the motor centered over the tranny. The way the ERBE is set up, the motor plate is secured to the tranny with 4 screws that are all on the left portion of the plate. The right portion houses the motor and is just floating with no support. With the weight of the motor hanging on it.
|
yep that's what i have.
it must be absolutly rubbish for COG but i got used to it and cant feel much difference between my convert and a proper ERBE.
but my plate has not bent
E-revo 3.3 conversion, 249kv outrunner, 6s, MMM
the porthole from the noob world an here has been opened!! that's how i got in.