RC-Monster Forums - View Single Post - how to remove a traxxas high current connector

E-Revonut · 07.21.2009, 03:58 PM

A pair of needle nose pliers works great for the male ends, use one side to just bite onto the tab and the other end on the backside of the casing, squeeze and they come apart pretty easy. For the females I place them on the edge of a block of wood and push the tab out with a screwdriver. I have taken apart at least 50 of these, they work over and over again without a problem

	(#8)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	07.21.2009, 03:58 PM A pair of needle nose pliers works great for the male ends, use one side to just bite onto the tab and the other end on the backside of the casing, squeeze and they come apart pretty easy. For the females I place them on the edge of a block of wood and push the tab out with a screwdriver. I have taken apart at least 50 of these, they work over and over again without a problem RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh