RC-Monster Forums - View Single Post

suicideneil · 07.25.2009, 06:56 PM

The Hvmaxx BEC runs fine on a single 4s lipo, just a little warmer than normal- I can testify to that much.

Anyway, when running a seperate BEC or rx pack, the esc should be left turned off, or remove the redwire from the rx plug (dont cut it, just tape over it), then the LVC should function correctly.

Im curious though, the sudden loss of power whehn you mash the throttle really shoudlnt be happening, sounds like the LVC is kicking in prematurely- how do you have the system wired exactly (the LVC is internal right?), normal setup with 2 sets of battery leads?

	(#10)
suicideneil Old Skool Offline Posts: 7,494 Join Date: Feb 2007 Location: Devon, England	07.25.2009, 06:56 PM The Hvmaxx BEC runs fine on a single 4s lipo, just a little warmer than normal- I can testify to that much. Anyway, when running a seperate BEC or rx pack, the esc should be left turned off, or remove the redwire from the rx plug (dont cut it, just tape over it), then the LVC should function correctly. Im curious though, the sudden loss of power whehn you mash the throttle really shoudlnt be happening, sounds like the LVC is kicking in prematurely- how do you have the system wired exactly (the LVC is internal right?), normal setup with 2 sets of battery leads? My Gmaxx thread EMAXX FAQ TUTORIALS USEFUL LINKS MY YOUTUBE