RC-Monster Forums - View Single Post

E-Revonut · 07.28.2009, 01:24 PM

Well where the battery was soldered to he deans still had the shrink on it so that pointwasnt the problem, but that's not saying one didn't come off the esc and short out against something. The power wires where unsoldered from the esc and the deans, then on the pack side they where also unsoldered from the deans

	(#63)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	07.28.2009, 01:24 PM Well where the battery was soldered to he deans still had the shrink on it so that pointwasnt the problem, but that's not saying one didn't come off the esc and short out against something. The power wires where unsoldered from the esc and the deans, then on the pack side they where also unsoldered from the deans RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh