Quote:
Originally Posted by ta_man
Sorry, no.
The Havoc ESC specifically will not run a motor without a working temp sensor (unless you have kluged a resistor setup on the sensor cable). I know this from experience because I have a SS5800 motor with a failed temp sensor and the Havoc gives the LED error code for "no temp sensor" with this motor. It will not run it.
|
The Havoc 2S and 3S and the HV Pro all have the "blue wire software". The Goat 2S and 3S Crawler escs have a different sensing program to detect whether or not a Crawler motor is being used. If not, the esc reverts to standard configuration, not crawling.