|
07.29.2009, 11:31 PM
the original t-maxx tranny had a 5mm output shaft. I've used those output yokes with original maxx shafts cut to length, and then replaced the 5x11 bearing in the carrier with 6x11 bearings (to accomodate the new 6mm axle shaft) and then used maxx 17mm adapters and buggy wheels. Holding up so far to a 60mm medusa on 4s.
_______________________________________
It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.
|