RC-Monster Forums - View Single Post - brushless 1/5 4wd conversion about to begin! couple questions.

KaztheMinotaur · 07.30.2009, 01:11 PM

Pinion: https://sdp-si.com/eStore/PartDetail...upID=591&Qty=1

Look here for the spur: http://www.qtcgears.com/RFQ/default....rs/KHK064.html

Part number SSA1-60. The bore is 10mm but the tech lady said there was enough material there to drill the bore out to 12mm.

QTC doesn't have anything with a hub & set screw

	(#272)
KaztheMinotaur RC-Monster Carbon Fiber Offline Posts: 351 Join Date: Dec 2007 Location: Central PA	07.30.2009, 01:11 PM Pinion: https://sdp-si.com/eStore/PartDetail...upID=591&Qty=1 Look here for the spur: http://www.qtcgears.com/RFQ/default....rs/KHK064.html Part number SSA1-60. The bore is 10mm but the tech lady said there was enough material there to drill the bore out to 12mm. QTC doesn't have anything with a hub & set screw