Quote:
Originally Posted by suicideneil
~9.7v @ 80amps = 60c.. ermmm.
It is actually putting out 60c bursts- the voltage stays around 3.3v per cell, the current being drawn is up around 75-80amps, so 80amps / 1.35amps (1350mah pack remember) = 59.xxx. If you go by the heavier bursts, then its putting out around 40-50c bursts.
|
I'm not sure where you see it staying at or above 9.9V at 70+A? It's routinely under 9.9V at most any current over 40A.
I'm not saying it's a crappy pack by any means. I just think it's way overtaxed in that application. Hitting peaks of 40C+ on every trigger pull is not a safe use of a Lipo, period. I stand by my comments that this pack is not being used safely and if it goes poof, it's absolutely the fault of the user for putting it in the wrong application.