RC-Monster Forums - View Single Post

_paralyzed_ · 07.30.2009, 07:10 PM

with the maxx placement isn't so critical. since you have to clearance the chassis anyway it doesn't matter where it ends up fore or aft. once the center diff is in make the shafts and away you go. Maybe I'm missing something, but I know I could easily swap mine out to any maxx. You could even use any aluminum maxx center skid as the baseplate and then drill 4 holes for the mount.

	(#82)
_paralyzed_ working on a brushless for my wheelchair..... Offline Posts: 4,890 Join Date: Mar 2007 Location: minnesnowta	07.30.2009, 07:10 PM with the maxx placement isn't so critical. since you have to clearance the chassis anyway it doesn't matter where it ends up fore or aft. once the center diff is in make the shafts and away you go. Maybe I'm missing something, but I know I could easily swap mine out to any maxx. You could even use any aluminum maxx center skid as the baseplate and then drill 4 holes for the mount. _______________________________________ It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.