RC-Monster Forums - View Single Post - MMM V2 to V3 replacement plan still available?

SpEEdyBL · 08.04.2009, 02:13 AM

My V2 is still running strong. I've opened the case six times to resolve fan issues (including solderin the fan wires to the board after the connector broke off) and had the on/off switch broken off twice. Now that I have completely removed the fan and on-off switch, and have always used the latest software, I have pretty much eliminated all the common problems that would cause the esc to fail.

	(#7)
SpEEdyBL "Out of spec" enthusiast Offline Posts: 820 Join Date: May 2005	08.04.2009, 02:13 AM My V2 is still running strong. I've opened the case six times to resolve fan issues (including solderin the fan wires to the board after the connector broke off) and had the on/off switch broken off twice. Now that I have completely removed the fan and on-off switch, and have always used the latest software, I have pretty much eliminated all the common problems that would cause the esc to fail. Check out my custom converted 8ight: Sub 7lb, lowest CG of any 1/8 buggy http://www.rc-monster.com/forum/show...894#post367894 Area 52 Ranch Raceway T.R.C.R.