Quote:
Originally Posted by Arct1k
I'd up the voltage to 4s with around a 6k for that size main (it will be heavy though) - look for a 1512 motor around 2k.
The MM will need a BEC for cool operation, extra external Low ESR cap and fan.
I wouldn't solder to the board...
|
+1
A bigger external, low ESR cap rated for 25V or higher, an external BEC, and a I would suggest a ~30mm fan screwed into the heatsink. Can't wait for the MM Pro
, but I suppose that's anyones guess when that's going to be officially released.