RC-Monster Forums - View Single Post - Project E-Mini Bike, Using an Outrunner

Metallover · 08.06.2009, 11:46 AM

Tired out the ohm thing. Never could get the reading to change by moving the throttle...

20k
Black/Red (contacts)

Green/Yellow 7.64
Green/Red 9.08
Red/Yellow 1.68
Yellow/Red 1.69

200k
Black/Red

Green/Yellow 53.2
Green/Red 55.1
Yellow/Red 1.6
Red/Yellow 1.6

2000k
Black/Red

Green/Yellow 433
Green/Red 433
Yellow/Red .1
Red/Yellow .1

None of the other wire combinations got a reading except the ones listed above. I think I may have a different type of throttle then what's required?

	(#10)
Metallover RC-Monster Spudgunner Offline Posts: 2,353 Join Date: Apr 2008 Location: South Dakota	08.06.2009, 11:46 AM Tired out the ohm thing. Never could get the reading to change by moving the throttle... 20k Black/Red (contacts) Green/Yellow 7.64 Green/Red 9.08 Red/Yellow 1.68 Yellow/Red 1.69 200k Black/Red Green/Yellow 53.2 Green/Red 55.1 Yellow/Red 1.6 Red/Yellow 1.6 2000k Black/Red Green/Yellow 433 Green/Red 433 Yellow/Red .1 Red/Yellow .1 None of the other wire combinations got a reading except the ones listed above. I think I may have a different type of throttle then what's required?