RC-Monster Forums - View Single Post - A MMM in Savage Flux question for Castle or the gurus

fastbaja5b · **A MMM in Savage Flux question for Castle or the gurus -** 08.13.2009, 11:02 AM

Hey guys, I'm heading out with some of the guys for a Savage bash next week, and usually we end up mudding this time of yr. I'm wanting to protect my MMM (Flux Motiv) speedy if I can.

Would one of these be safe to use around it?

http://powerslideracing.com.au/index...roducts_id=571

I am running the Stock 20/44 gearing with 2 * 2s2p 4600mah A123 packs (30/60C rated so 138 Amps constant rated) geared for 34mph (54kph)

Both A123 packs have had the stock 14 guage wire removed and replaced with 10 guage wire and genuine deans plugs.

We typically give the trucks a blow down with the compressor after each run.

Would appreciate your input guys.

	(#1)
fastbaja5b RC-Monster Aluminum Offline Posts: 704 Join Date: May 2008	A MMM in Savage Flux question for Castle or the gurus - 08.13.2009, 11:02 AM Hey guys, I'm heading out with some of the guys for a Savage bash next week, and usually we end up mudding this time of yr. I'm wanting to protect my MMM (Flux Motiv) speedy if I can. Would one of these be safe to use around it? http://powerslideracing.com.au/index...roducts_id=571 I am running the Stock 20/44 gearing with 2 * 2s2p 4600mah A123 packs (30/60C rated so 138 Amps constant rated) geared for 34mph (54kph) Both A123 packs have had the stock 14 guage wire removed and replaced with 10 guage wire and genuine deans plugs. We typically give the trucks a blow down with the compressor after each run. Would appreciate your input guys. Say Less, Do More.